Pack of 20 wick tabs.
 
Use these handy metal wick tabs to create new wicks from your off-cuts. 20mm wide base with a 6 mm long neck. Wick tabs are used to attach cotton wicks to the base of a container and are also a safety device to ensure that a wick cannot burn all the way to the bottom of the jar.
 
Specifications
Material: Metal
Diameter: 20mm
Height: 6mm
Neck: Large
Uses for: Wick sizes above CDN22 or ACS9.0
 
Instructions
1. Pass the wick through the center of the wick tab until one end of the wick is flush with the bottom of the tab.
2. Use a crimping tool (or a pair of long nose pliers) to crimp the tab tightly onto the wick. Your new wick assembly is now ready to use. When crimping the wick tab be careful not to apply so much pressure that that base begins to bend.